The International Journal of Advanced Manufacturing Technology

After 4 months, the first SCI article was accepted. The journal is very good, and 7 reviewers gave sufficient opinions and material directions. If you want to discuss with me, you can email to youjiaqingyjq@163.com, indicating your intention. 20 Oct 2019 Editor Decision-Accept; 26 Jul 2019 Acknowledge Receipt of Revision; 26 Jul 2019 AU-Revised PDF Built by Author; 21 Jul 2019 Reminder to Author: Revision Due Date Upcoming; 14 Jul 2019 Editor Decision-Major Revise; 25 Jun 2019 PDF Built; 25 Jun 2019 Author Submission; 25 Jun 2019 PDF Built.

(3) Thank | 尤小胖

I finally received the acceptance notice before my graduation. I am very grateful to the friends for giving me confidence. When I received the opinions requiring for major revision, I was almost desperate seeing those opinions, but I still carefully revised and submitted it. It took 7 months and the efforts were not in vain! Post my submission process here: 2018.11.19 PDF built; 2019.04.04 Major revise; 2019.04.25 Acknowledge receipt of revision; 2019.05.19 Major revise; 2019.06.05 Acknowledge receipt of revision; 2019.06.19 Accept. In addition, editor Andrew YC Nee is really good. Originally, it should be rejected at the first review, but the editor still gave us the opportunity to revise, thank you so much!!!

(3) Thank | cris11

The expert who mentioned in front that “I’m so happy that the article has been accepted. What I worry about now is not whether the article can be accepted, but whether the International Journal of Advanced Manufacturing Technology (IJAMT) be kicked out of SCI before graduation, because the 40% self-citation rate is really worrying.” I also agree with this point. So, even if the editor required that “Please cite articles in this journal to show the relevance”, I will not deliberately cite the latest articles published on IJAMT, because citing articles within the last 2 years will cause self-citation rate. But from another perspective, at present, the impact factors of SCI journals such as machining and manufacturing are rising, and the contribution of IJAMT is not excluded or ignored. Therefore, I personally think that it is less likely to be kicked out. Anyway, I fell that many authors in order to please the editor, they have cited too many articles published on IJAMT, causing the self-citation to be too high and being kicked. They can only reap the fruits of their actions. I wish you all the best in your research!

(9) Thank | KAVA

Overall not too difficult but a relatively slow review and revisions must be carefully executed.

(1) Thank | 1040198976@qq.com

Thanks a lot to the editors and reviewers for giving me the opportunity to successfully publish the first SCI in my life, especially fortunate.When I submitted the manuscript, I received a lot of help from netizens. I am here to come back and hope that everyone's efforts will have good results.13 Dec 2018 Editor Decision - Accept 128 Nov 2018 Acknowledge Receipt of Revision 128 Nov 2018 AU - Revised PDF Built by Author 120 Oct 2018 Editor Decision - Major Revise 023 Aug 2018 Author Submission 023 Aug 2018 PDF Built 0

(4) Thank | 三叶草wq

19 Nov 2018 Editor Decision - Accept17 Oct 2018 Acknowledge Receipt of Revision17 Oct 2018 AU - Revised PDF Built by Author13 Sep 2018 Editor Decision - Major Revise06 Jul 2018 Author Submission05 Jul 2018 PDF Built

(0) Thank | vbcnxmz

Under Review ... 2 months out

(3) Thank | 419737022@qq.com

Very good journal, processing speed is very fast, May overhaul, direct admission after June minor repair, continue, come on!Share with you: 725554986

(0) Thank | 707145297@qq.com

The reviewer is very responsible, reviewing the draft quickly, overhauling it, and directly hiring it after minor repairs.Still very lucky to submitted the first draft.Ha ha...Go ahead, come on!Share it together: 725554986

(0) Thank | 707145297@qq.com

The first article, overhaul, after the minor repair, it is recommended that the first article can be submitted, practice hands

(0) Thank | 17801001181@163.com

After 5 months, the result was rejected.19 Nov 2017 PDF Built19 Nov 2017 Author Submission20 Nov 2017 Manuscript Sent Back To AU (MUST BE CUSTOMIZED)20 Nov 2017 PDF Built19 Apr 2018 Editor Decision - Reject

(1) Thank | adswaf

Submission - Accept a total of 5.5 months.15 Otc 2017 Submitted to Journal21 Feb 2018 major revision4 Mar 2018 Receipt of revision31 Mar 2018 Accepted

(2) Thank | Jason

The review schedule is longer than 5 months, minor revision, received after one month, okay!

(1) Thank | byond8848

Today saw the number of articles issued in 2017 as 1998.The impact factor is estimated to rise in 2018 and is currently estimated to be 5280/2497 = 2.114.

(0) Thank | utubo

This journal is getting more and more awkward meaning!Our teacher team has submited more than a dozen in the last 5 years, about 17!According to the draft, 2 articles, according to the algorithm is also partial!In general, the cycle is from three months to five months, and the difficulty coefficient is easy, suitable for novice submissions!The impact factor can be, but the self-introduction rate is too high, and it is basically pulled by 40%!So the impact factor is OK!In general, count the gospel of Chinese students!After all, this is a big amount!

(10) Thank | Sd university

Initial Date Submitted: 28 Sep 2017Accept: 12 Jan 2018

(4) Thank | wangyishunsdu@163.com

contributed for three months, overhaul, repair, and editor second.Different opinions on the review comments: The reviewer expert mainly said that my algorithm has problems, it is very uncomfortable anyway, the experts are more moderate, and it is recommended to overhaul; the same point: no experimental verification.Solution: Each question is answered and an experimental verification is added.The impact of the individual on the journal: The editor is very tolerant, as long as the content has innovation points, the euphemistic answer to the questions raised by the experts can generally be passed.

(0) Thank | 小博一枚

19 Aug 2017 PDF Built19 Aug 2017 PDF Built19 Aug 2017 PDF Built19 Aug 2017 PDF Built19 Aug 2017 Author Submission24 Sep 2017 Editor Decision - Minor Revise25 Oct 2017 AU - Revised PDF Built by Author25 Oct 2017 Acknowledge Receipt of Revision12 Nov 2017 Editor Decision - Accept

(0) Thank | owenql@126.com

Review 5 months, overhaul, hope to be in.

(0) Thank | 试试

Reviewing for 5 months, overhaul, hope to be in the middle.

(0) Thank | 试试

Reviewing for 5 months, overhaul, hope to be in the middle.

(0) Thank | 试试

3 Half-monthly accept, the only thing that is uncomfortable in the snack is to quote his own article. Seeing that he is going to break 40%, I am really worried about you. Don’t be afraid when you graduate.Just kick it!

(6) Thank | dllg

Three months, has been underreview, I hope luck is better!

(1) Thank | byond8848

The review speed is still good, and the results are 2 months in the first trial.I accepted it 20 days after the repair..The self-introduction rate of this journal is a bit high, and there is a possibility that the wood may be suppressed....

(0) Thank | aaa

is very happy, after waiting for so long, finally there is a result!Come back here!I wish you all the essays will be acceptd soon!13 Aug 2017 Editor Decision - Accept11 Jul 2017 Acknowledge Receipt of Revision11 Jul 2017 AU - Revised PDF Built by Author11 Jul 2017 AU - Revised PDF Built by Author05 Jul 2017 Reminder to Author: Revision Due Date Upcoming28 May 2017 Editor Decision - Major Revise21 Mar 2017 Author Submission21 Mar 2017 PDF Built

(1) Thank | hhh